Start with compaction using a
powered plate compactor, or hand tamper in small areas. Make
sure the moisture content of the base material or soil is
just right. Soil that is too damp or too dry will not
compact properly.
At the edges of your pavered
area where there isn't an existing surface to butt up
against, be sure to install proper edge restraints. This can
range from pre-fabricated flexible plastic edging to
creating a "soldier" course using a paver secured by
concrete as your edge.
Travertine pavers can be dry
set as indicated above and allows for a much simpler
installation and easy repairs should they be necessary in
the future. Our travertine pavers can also be mud set on top
of existing concrete.
Travertine pavers can be cut
using the same blades and tools that are used to cut brick
pavers or other natural stones. Any diamond blade should
suffice, but be certain to wear the appropriate safety gear
at all times.
To finish the installation,
sand can be swept into the joints once everything is in
place, or you can even use grout, or nothing at all.