PROFLEX® PRO-STICK 40 LHT is an (ANSI 118.11) latex-modified, large heavy tile mortar composed of sand, cement, and resins used to adhere various tile surfaces, natural stone, marble, and granite, to approved substrates.
Specially formulated to hold large format tiles and stone surfaces in place on vertical surfaces and reduces unevenness caused by setting tiles on horizontal surfaces.
PRO-STICK 40 LHT is applied in thickness from 3/16 to 3/4 inches to adhere marble, granite, and tile to plaster, drywall, concrete, and masonry surfaces.
Designed to set tiles vertically up to 5 lbs. per sq. ft. (Larger-sized units must be field tested to determine suitability).
USES:
For installation of:
- Ceramic tile
- Pavers
- Quarry tile
- Porcelain tile
- Clay-bodied tile
- High bottom lugged tile
- Marble
- Granite
- Mosaic
- Large format tiles
- Vertical tile installations up to 5 lbs per sq.ft.
For installation over:Â
- Tile backer board
- Plumb and true masonry
- Properly cured and finished concrete
- Gypsum plaster
- Gypsum block or gypsum board (dry areas – walls only)
- Cured Portland cement mortar
- Exterior grade plywood
- Plastic laminates
- Masonry surfaces
- PROFLEX® Membranes
COVERAGE:
Coverage will vary with the condition of the substrate. Required trowel size will vary with the tile size, type and substrate uniformity.
Select the trowel size that will ensure 100% coverage.
The figures below are presented only as guidelines.
- ½” x ½” x ½” Square Notch, yields 40 – 50 sq. ft.
- ¼” x ⅜” x ¼” Square Notch, 70 – 80 sq. ft.
